Building Inspector Checklist: The Scope Of Building Inspection

A building inspector is responsible to look through your property and check for anything that compromises the integrity of it. This professional looks for any damages or malfunctions within the area and generates a report which you possibly can analyse that can assist you come up with a better decision.

Building And Pest Inspection Checklist

As the owner, it is essential for you to know the things that a building inspector must assess when conducting inspection at your property. Provided below is the checklist.

Doors – Are they planned to fit the frame? All door panels in your building should open and close without obstructing the door frames.

Windows – just like the doors, windows should also open and shut easily. Inspectors usually check for cracked panels, damp damage, and condensation.

Wall and ceilings – surfaces of those areas must be checked for mould and damp markings. Is there any buckling from the doorway? How about irregular areas of mould stains or fresh paint?

Roof – the color, frame, cover, and drainage are checked here. The type of timber used must be determined as well as some hardwood timber can cause sounds when the season changes. Are there water or rust marks? How is the storm water pipes installed?

Kitchen – all fittings in this space ought to be secured. Check kitchen sink for any damp stains. Are there leaks under the sink?

Exterior wall – inspectors check for any signs of movement here. Supplies used might have bowed or sagged.

Sub floor area – the quality of material is checked at this point. Soil surface as well is checked to make certain that water courses are good.

Bathrooms – things checked on this area are the taps, shower screens, sink, bathtub tub, tiles, shower bases, exhaust fans, scorching water supply, etc. Everything ought to perform properly.

Bathrooms – there ought to be no leaks after flushing. Inspector should look for signs of extreme sealant.

Laundry – overflow drain ought to be checked. The trough and wall in this space needs to be sealed and free from rust.

Plumbing – supplies used are checked. Are there broken seals and cracks in waste pipes?

Electrical – the fuse box ought to have modern circuit breaker, wiring cable should be white, and there needs to be earth leakage safety switch.

In case you loved this information and you wish to receive details concerning leak detection auckland please visit the web site.

Leave a Reply

Your email address will not be published. Required fields are marked *